Because the surface is rough and easy to hide dirt, special care should be taken in maintenance.
Regular cleaning is very important. You can use a high-pressure water gun to rinse the whole thing first to wash away the dust and dirt on the surface. If the pollution is serious, you have to use a special cleaning agent, add water and pour it on the contaminated area, and scrub it with a brush or machine.
After cleaning, be sure to dry the stone. You can dry it naturally or use a far-infrared lamp to dry it. Just make sure that the surface of the stone is dry, otherwise it is easy to leave water stains.
Applying protective agent is the key. Rough surface stone must use the protective agent specially used for rough surface stone. After brushing, it can penetrate into the front surface of the stone and cover the surface of the stone to form a protective layer. It is waterproof, oil-proof and anti-fouling. After brushing, remember to dry it for more than 24 hours before putting it into use.
If the surface of the stone is rusty and yellow, and there are stains, it must be dealt with quickly. You can use steel wool to polish off the floating rust on the surface, and then use a special rust remover to remove the rust. For materials, just use the corresponding cleaning agent to apply it.
In normal times, you should also pay attention to dust prevention. You can use an electrostatic vacuum cleaner or a stone surface cleaner to push away the fine sand and dust on the surface to avoid them from damaging the stone surface.
The maintenance of rough stone is to clean it more, dry it more, and apply more protective agents. You should also pay more attention to dust prevention in normal times, so that the stone can be used for a long time and look more beautiful.
