How To Remove Scratches on Epoxy Floor Surface

Although epoxy flooring has good wear, pressure, and impact resistance, it is easily scratched by sharp objects such as sand, and the scratches are deep. They must be repaired in time, otherwise they will affect the adhesion of the surrounding epoxy coating. How do you repair epoxy floor scratches?

Epoxy floor renovation：

If the scratches on the surface of the epoxy floor are serious and affect the beauty of the entire floor, it is recommended that it be renovated. Specifically, you can use a grinder to grind the surface to remove the remaining old floor coating and uneven surface, and then re-lay the epoxy floor to make it look brand new.

Applying finishing paint：

If there are only slight scratches on the surface of the epoxy floor, you can use finishing paint to protect it. Applying a layer of finishing paint on the surface scratches can make up for the minor defects on the surface, thereby extending the service life and beauty of the floor.

Repair coating：

If the scratches on the floor are not very serious, you can use the repair coating method. First, you need to grind the surface of the epoxy floor at the scratch, then apply a coating of the same color as the floor at the scratch, and then use a grinder to grind it flat.

How to effectively prevent epoxy floor scratches?

1. Daily cleaning and maintenance: Use a soft broom or rag to clean the floor regularly, and remove coarse sand, soil, and other debris in time to avoid ground wear.
2. Control vehicle and personnel activities: When vehicles and personnel enter the epoxy floor area, they should control the driving speed, and avoid sudden acceleration, sudden braking, etc., to reduce the instantaneous pressure and friction on the ground.
3. Clean the work area regularly: Keep the ground clean and reduce fine sand to reduce the risk of ground scratches.
4. Clean up corrosive substances in time: Corrosive substances such as oil and water should be handled as soon as possible to avoid long-term corrosion of the ground and cause scratches.
5. For high-wear areas: For factories that often use forklifts and other equipment, it is recommended to use wear-resistant floor materials to deal with problems such as excessive wear, paint peeling, and dust pollution.