Diamond Coping Saw Steel Frame for Wood Stone Cutting 140 mm

Description

Z-lion Diamond Coping Saw Steel Frame

Z-lion diamond coping saw is a type of handsaw used for intricate cutting of curves and complex shapes in wood, metal or plastic.It’s held in place by frames made of either metal and wood. The blade is tensioned using a small screw, allowing it to be easily replaced or adjusted.
The wooden frame helps to reduce the weight of the saw, making it easier to maneuver, while also providing a comfortable grip during use.

Feature of wire hand saw

• Hand-Powered Cutting Tools.
• One pieces of Saw Frame without diamond wire.
•  Use in Dry or Wet, wet use recommend.
• Use for fixed diamond wire to cutting stone,wood,granite,marble,jade,jewelry and more.
• No rusting, our wire saw frames have a fully polished plating.
• High efficiency smaller cutting seam, low waste and more yield.
• With wing screws that firmly secure the blades into the frame.
• Easy to use fit in your hand that with a smooth hardwood handle.
•  Very lightweight and rigid to provide precise control and reduce wire saw breakage with very little flex.
• Z-lion coping saw is useful for cutting miniature, microscopic objects. If you are a craftsman of miniature things, then this saw should be in your toolbox.You can get a lot of work done with our coping saw, but you don’t have to worry about your hands slipping on the job. The handle of the small miter saw is finished with hardwood to provide a comfortable grip. You also don’t have to worry about hand strain because of the smooth surface of the handle on this coping hand saw. This way you can always be ready for every job.

Coping saw usage

Fix the diamond wire in the saw frame,Due to the thin cutting line, the screw should be properly clamped when mounted on a saw. To avoid excessive force, please use the screws to make the saw blade hard and fragile to prevent the screws from being caught by the saw blade. and cut with a back and forth motion, please don’t use too much force. The diamond wire should be tightened and straightened, so that even cutting will get better results.